bookmark_borderBand Saw Box

All my spare blades for the band saw have been sitting in an inadequate CocaCola crate for years. This state of affairs was becoming more and more untenable when I was switching blades back and forth during the shogi project. While I was waiting for some glue to dry on a more central project, I decided to rectify that.

Band Saw box on Band Saw Table

The faces are some 3/16″ plywood from the scrap pile. The sides and floor of the box are some 3/8″ plywood from the scrap pile. Some of these utility projects are basically just ways for me to justify having kept around these massive quantities of scrap lumber for so long. The whole thing is just glued together with butt joints and pinned with 18gauge brads from the nail gun. One slightly fancy thing about this box are the two finger holes that make it easier to pick up the box.

Anyway, the interior is a little larger than 12″ wide, by 6″ deep. This gives me plenty of room to slide in the blister cards that Lowes sells 93.5″ band saw blades on. Another slightly fancy thing is a bracket for holding the miter gauge. It’s always a challenge finding someplace to put that thing when I’m no t using it. You can see how nicely this box fits on the band saw table, making it difficult for these two items to get separated.

Some months ago, I reorganized the shop a bit to make it easier to get to the band saw. At the old house, the band saw was set up in the middle of the basement and was always available for little things like making useful boxes. I’m so glad I have this saw back where I can use it easily without having to move other stuff out of the way.