bookmark_borderMid-Height Japanese Sawhorses

Some years ago, I made a pair of low Japanese sawhorses for my workshop. They’ve been great, and very useful (mostly for keeping lumber off the floor in the garage), but it was time to take the next step up. My rickety western sawhorses spend most of their time itting outside in the rain and snow, so they are not in very good shape. A set of mid-height Japanese sawhorses would be nice to have, because they are designed to break down into pieces for transport and storage.

Sawhorses Four

These sawhorses are about 24 inches tall, 24 inches long, and 22 inches wide at the feet. This height is just short enough that I can put my knee on a board to hold it while sawing, but tall enough that I don’t need to worry about scraping my saw along the ground. All the joinery is mortise and tenon, and there is no metal hardware in anything.

They are made almost entirely from pine. Given their modest stature, I could cut all four horses from three 4×4’s, two 2×6’s, and one 2×4. This means that there is only about forty dollars of material in the whole set. The pegs that secure the feet to the legs and the wedges that secure the legs to the stretchers are made from some surplus walnut I had in the shop. It’s always best to make the fasteners from wood that’s harder than the wood it is securing, but maybe walnut was an extravagant choice.

I wanted to make these from cedar instead of pine, but it turns out that these days cedar is five times as expensive as pine. It used to be only twice as expensive as pine. My next big woodworking project is going to cost me $500 instead of $100 for the lumber alone. Gasp.

I cut all the pieces to length by hand, but I used the mortising machine to cut nearly all of the mortises, and the band saw to cut nearly all of the tenons. I smoothed the walnut fasteners with a hand plane, though. After completing all of the shaping and joining, it took me about three hours with the orbital sander to clean everything up and remove most of the saw marks.

When taken apart, I can fit all the pieces for three horses into a single large (27 gallon) storage tote. This means that in the winter I can put the horses away in the garden shed instead of having them sit outside like the old ones.

Four Sawhorses